top of page

ANTIMUFFA

General Characteristics :

High Quality Washable water paint with good coverage- Anti mold action paint , to be used in those areas subject to the formulation of mold due to the condensation of water vapor. And therefore ideal for painting walls where it is required a high degree of cleaning and hygiene such as kitchens, hospitals, butchers, food factories etc

Technical Characteristics :

# Specific Weight : kg 1.38 / ltr. Approximately

# Viscosity when supplied : Tixotropic Liquid

# Drying time : Not anymore dusty in 30 mins ; Dry in 5 hours . Hardened after 24 hours

# Color : White

# Aspect : Opaque , Gloss

# Yieldness : 10 / 12 mtrs squared / Litre

# Dilution : First coat @ 30 % , Second coat @ 20% in Volume ( With Water )

# Packaging : Ltrs. 14 – 5 – 2.5

Application :

Can be used on any type of media ; new surfaces must be brushed, plastered, sanded and then pass our ' acrylic Fixative.

Then apply two coats of ANTIMOLD at recommended dilution.

If the walls were already attacked by mold one needs to clean walls with hydrogen peroxide diluted with water @10 vol .

Than energetically brushing a lot to remove any mold .

Then proceed as above .

# Application : Brushable – Woolen Roller - Sprayable

# Cleaning of Tools : With water immediately after usage

# Storage : Keep in a dry cool place , without adding water ,

holding containers tightly closed and protected from Frost .

bottom of page